Grid Evolution 200 Machine

The largest and cost-effective production line in its class for manufacturing of a composite grid in width of 2000mm.

Productive and reliable, easy to maintain (one operator can control the line).

The equipment is maximally flexible, easily controllable and programmable.

The machine is characterized by a centralized control system of the entire line from one workstation. This reduces the time for commissioning and minimizes training costs. Simplifies the entire production process and reduces the cost of serving employees to manage all line nodes.

The management interface is simple and intuitive. Each switch and indicator is signed, comments and recommendations are given directly on the shield. The control panels are divided into 3 sections: Furnace and bath temperature, weaving process, line drive devices.

Automatic implements the following functions simultaneously:

– Control of the cut-off device of the grid cutoff by the meter from the incremental encoder

– Temperature control of the curing furnaces (4 independent control zones)

– Heated resin in the bath (2 control zones, 2 control Channels)

– Cooling Pumps (2 pumps)

– Pneumatic system (distributed with power from 1 compressor)

– Optical system (positioning and control of netting)

– Systems of cooling of drives and indication of processes of work of Knots and a line as a whole

– Winding unit and automatic feed of the transverse rod.

Feature: In the manufacture of large-sized lattice or big diameter grid in the first case the performance increases, in the second-does not decrease, relative to the value specified in the specification.



Power supply: ~ 380 in the frequency of 50hz.

Peak power (start time up to 25-30 min): 27 kw/h.

(or 10-15 minutes with infra-red).

Furnace Temperature control: 4 Zones, independent.

Average power during Operation: less than 7.5 kw/h.

Capacity: 1 Grid cell 2.8 sec. or 81m/h for a grid step of 50mm; 162m/h for step 100 mm.

Maximum mesh dimensions (width) 2000mm.

Grid cell spacing: from 35 – 300 mm any (electronic positioning system, applied instantaneously without mechanical interference in the work of the line).

Process Control: optical sensor system.